Skip Navigation

Materials for Advancement of MXER Tether Design (1000-549), Phase II

Completed Technology Project

Project Introduction

Materials for Advancement of MXER Tether Design (1000-549), Phase II
There exist a need to develop, identify, and classify various materials that can be used in the fabrication of electrodynamic tethers for various applications. These applications consist of but not limited to power generation, orbital maneuvering, and planetary exploration. A momentum exchange (MXER) tethers utilizes the electrodynamic tether interaction with the planetary magnetic field to provide thrust to a payload in Low Earth Orbit (LEO). While technological challenges, both materials and non-materials related, currently limit the utilization of the MXER concept, significant advances in materials science will allow the maturation of the system into a viable technology for propulsion in and beyond LEO. Tether materials-related advances are primary for improving the operation and lifetime of the propulsion system. Critical materials properties in need of improvement include increases in tensile strength, electrical conductivity, shock resistance, continued flexibility during exposure to an environment rich in radiation and energetic atomic oxygen. Furthermore, the tether design must incorporate materials with the required characteristics in a manner to allow tolerance to repeated micrometeorite impacts without significant loss of the aforementioned properties. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.