Skip Navigation
SBIR/STTR

Scalable, Lightweight, Low-Cost Aero/Electrodynamic Drag Deorbit Module, Phase I

Completed Technology Project

Project Introduction

Scalable, Lightweight, Low-Cost Aero/Electrodynamic Drag Deorbit Module, Phase I
The proposed effort will develop the "Terminator Tape Deorbit Module", a lightweight, low-cost, scalable de-orbit module that will utilize both aerodynamic drag enhancement and electrodynamic drag to rapidly remove small satellites from LEO altitudes, enabling compliance with orbital lifetime restrictions such as NSS 1740.14 and DoD Instruction 3100.12, Sec. 6.4. Unlike de-orbit devices that rely solely upon aerodynamic drag, which provide no significant reduction in the probability of collision with another space object during orbital lifetime, the Terminator Tape's generation of electrodynamic drag can dramatically reduce the Area-Time-Product of the system, minimizing chances of debris-generating collisions. The proposed Terminator Tape design utilizes space-qualified materials, requires only standard pyro signals from the host spacecraft for activation, requires no internal avionics, and its deployment method has already been demonstrated successfully in microgravity. It can also accommodate installation of solar cells or other devices on its surface to minimize footprint impacts on small spacecraft. It can also be configured to serve as a multifunctional element, acting as multi-layer insulation (MLI). Positive control of de-orbit timing is provided through a simple actuation requiring only a pyro signal. The device is readily scalable from picosats up to large spacecraft, and in the proposed effort, we will develop a flight ready prototype sized for testing on a CubeSat as well as detailed designs of modules sized for 15 kg nanosats and 100 kg microsats. We will also investigate and test innovative methods for maximizing electrodynamic current, including photoemissive and low-work-function thermoelectric materials. These Phase I efforts will prepare us to perform a flight test on a CubeSat or other low cost platform in the Phase II effort. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

A final report document may be available for this project. If you would like to request it, please contact us.

^