Skip Navigation
SBIR/STTR

Integrated Circulator for Regenerative Cryocoolers, Phase I

Completed Technology Project

Project Introduction

Integrated Circulator for Regenerative Cryocoolers, Phase I
Future instruments and platforms for NASA space applications will require increasingly sophisticated thermal control technology, and cryogenic applications will become increasingly more common. For example, the Single Aperture Far-IR (SAFIR) telescope and other cryogenic telescope missions must provide distributed cooling and multiple heat lift. Also, the management of cryogenic propellants requires distributed cooling through integrated heat exchangers for zero boil-off, densification and cooling of structural members. To address these requirements, we propose to develop a lightweight, continuous-flow cooling loop that can provide cooling and temperature control to multiple, distributed loads. This approach allows relatively simple mechanical and electrical integration and maintains high refrigeration system efficiency. The basis of the loop is a rectifying interface that converts the oscillating pressure that characterizes the operation of a regenerative cryocooler into a quasi-steady pressure difference that can be used to drive a continuous flow of cold gas over distances of several meters. The rectifying interface has the potential secondary benefit of rapid and therefore precise load temperature regulation of multiple sensors or structures using actively controlled throttle valves to regulate the local gas flow. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

^