Skip Navigation
SBIR/STTR

Computational Wind Tunnel: A Design Tool for Rotorcraft, Phase II

Completed Technology Project

Project Introduction

Computational Wind Tunnel: A Design Tool for Rotorcraft, Phase II
During initial design studies, parametric variation of vehicle geometry is routine. In addition, rotorcraft engineers traditionally use the wind tunnel to evaluate and finalize designs. Estimation of rotor tunnel blockage is significantly more complex than bluff body corrections as the correction depends on operational characteristics such as rotor RPM and thrust produced. This proposal offers to develop an Integrated Design Environment (IDE) which can simulate a complete rotorcraft with or without wind tunnel walls including all the facility effects. At the heart of the innovation are: 1. An automated hybrid grid generator (viscous grids near the bodies and unstructured Cartesian grid everywhere else). 2. A robust and economical incompressible flow solver for the entire system of grids. 3. Momentum source based rotor model that is suitable and economical for simulating configurations with multiple rotors. In Phase I, the proof-of-concept developed used unstructured Cartesian grid for the model and wind tunnel. In phase II, the tool will be extended to hybrid grid with viscous grid near solid surfaces and will include several tools including a simple CAD like geometry manipulation tool and pre- and post-processing tools all integrated in one environment to facilitate ease of use. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

Light bulb

Suggest an Edit

Recommend changes and additions to this project record.

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

^