Skip Navigation
Small Business Innovation Research/Small Business Tech Transfer

Variable Emissivity Electrochromics using Ionic Electrolytes and Low Solar Absorptance Coatings, Phase II

Completed Technology Project

Project Introduction

Variable Emissivity Electrochromics using Ionic Electrolytes and Low Solar Absorptance Coatings, Phase II
This work further developed a highly promising variable emissivity technology for spacecraft thermal control, based on unique conducting polymer (CP) electrochromics combined with ionic electrolytes, developed earlier by this firm (Air Force, JPL) with: Extremely thin (< 0.2 mm), flexible (plastic), lightweight (0.192 kg/m^2), variable area, "skin-like" construction; Delta-Emittance > 0.4, emittance range 0.15 to 0.90; power 40 micro-W/cm^2; proven space durability (thermal vacuum, atomic-O, VUV, solar wind), operating temperature (-)70 to (+)105 C); use of ionic electrolytes with zero vapor pressure needing no seal; low cost (est. $5K/m^2). A technical hurdle in the earlier-generation technology, of high solar absorptance (values up to 0.8) in the dark, high-emissivity state, remained, the sole hurdle hindering implementation of the technology. The Phase 1 introduced the new innovation of unique, proprietary IR-transparent coatings lowering the solar absorptance (Alpha(s)) of the variable emittance devices ("skins") drastically. In Phase 1, the best coatings yielded Alpha(s) of 0.306, emittance of 0.383 for the light state, and Alpha(s) 0.454, emittance 0.841 for the dark state (Delta emittance 0.458), with a calculated temperature under direct sunlight in space of < 60 C. Devices endured thermal vacuum > 110 days, VUV, atomic-O exposure, abrasion tests. Calorimetric emittance measurements under space vacuum were identical to emissometer measurements in air. In Phase 2, the primary objective will be ground space qualification and a TRL of 7 or higher, with an extensive series of tests to include: thermal vacuum, thermal cycling, solar wind, atomic-O, micrometeoroid, vibration, ESD. These will be done in our labs as well as at several partner labs, including two large aerospace companies who are Phase 2 commercial partners, and several outsourcing vendors. At least one firm spaceflight opportunity has been identified. Expected TRL at end of Phase 2 is 7-8. More »

Primary U.S. Work Locations and Key Partners

Technology Transitions

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

Technology Areas

Light bulb

Suggest an Edit

Recommend changes and additions to this project record.

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.