Skip Navigation
SBIR/STTR

Development of an Engine Air-Brake for Quiet Drag Applications, Phase II

Completed Technology Project

Project Introduction

Development of an Engine Air-Brake for Quiet Drag Applications, Phase II
A novel quiet engine air-brake (EAB) is proposed in response to NASA's solicitation for active and passive noise control concepts for conventional and advanced aircraft. The EAB concept is applicable to 1) next-generation, conventional tube and wing aircraft (current generation +1) and 2) advanced integrated airframe/propulsion system configurations (current generation +2, +3). Potential retrofit opportunities are also envisioned. Phase 1 analysis on NASA's Source Diagnostic Test (SDT) fan stage suggests that an EAB could realize three to four decibels overall noise reduction under the approach flight path by generating a swirling exhaust with drag equivalent to one to two turbofan-sized bluff bodies per powerplant. Such drag generation could enable slower and/or steeper and/or aero-acoustically cleaner approach trajectories. A Phase II development program is proposed to 1) perform aerodynamic designs of dual-stream, swirling bypass flow nozzles and experimentally assess their performance and noise, 2) develop conceptual aero-designs that address current engine architecture issues such as pylon duct bifurcations, and 3) develop a prototype design of an EAB for validation in a model-scale rig. The final deliverable to NASA will be a written report presenting design, analysis and experimental results from blown nozzle testing, plus a prototype EAB design. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

A final report document may be available for this project. If you would like to request it, please contact us.

^