Skip Navigation
SBIR/STTR

Automated Analysis of Imaging Based Experiments, Phase I

Completed Technology Project

Project Introduction

Automated Analysis of Imaging Based Experiments, Phase I
For many applications involving liquid injection, the ability to predict the details of the breakup process is often limited due to the complexity of the two-phase phenomena. Likewise, the ability to experimentally characterize these phenomena is also limited due in part to the need to rely upon visualization tools which are inherently qualitative. As a result, the ability to validate predictions using these diagnostic tools is also limited. In recent years, visualization diagnostics have evolved substantially in terms of spatial and temporal resolution. The advancements, coupled with a tool to conveniently quantify the results obtained relative to the breakup process offer the potential for a marked increase in understanding of this phenomenon. The proposed effort will develop such a tool that will be applied initially to the problem of liquid injection into a crossflow. The typical characteristics associated with this type of liquid breakup, such as column flattening, bending, fracture point, dynamics, etc. will be automatically quantified using the tool proposed. The project will utilize existing results obtained with state-of-the-art high speed imaging. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

^