Skip Navigation

Beam Combination for Sparse Aperture Telescopes, Phase II

Completed Technology Project

Project Introduction

Beam Combination for Sparse Aperture Telescopes, Phase II
This proposal is for funding to continue development of an alternative beam combiner for Stellar Imager (SI), a 30-aperture, interferometric telescope chosen as one of fifteen Vision Missions. Called the Spatial Frequency Remapper, SFR, it trades the large field of view of a Fizeau design for simultaneous observations at multiple wavelengths. Since SI does not require a large field, SFR, is a clearly better design. It can produce better images and allows tight control requirements to be relaxed. The SFR is also the heart of a full-aperture interferometric imaging system that will dramatically improve the performance of AO equipped telescopes. The Phase I study was remarkably successful. The SFR design was rejected during the Vision Study because of its perceived optical complexity. That concern was retired; the design is robust, even with many apertures. It needs only three optical surfaces, down from the five-surface design of the Vision Study. Tolerances are not tight. The inputs can be divided between combiners, further simplifying the optics and data flow with negligible effect on mission performance. The search for better sparse-aperture configurations worked. The search was sped up 1000 fold, enabling the discovery of the 30-aperture configurations needed for SI. The main commercial application, improving images from AO equipped telescopes, requires a seemingly impossible to build optical fiber interface. We found an alternative assembly procedure that is standing up well to detailed study. A data reduction technique was developed that should improve sensitivity by a factor of 1000, increasing the range of possible applications. The configuration search found ways to divide a full-aperture into the multiple configurations, tying off another loose thread in the design. Finally, a testbed and prototyping plan was developed since in our view the success of the Phase I study clearly supports continuing the development of this technology. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

A final report document may be available for this project. If you would like to request it, please contact us.