Skip Navigation
SBIR/STTR

Autonomous Collaborative Agents for Onboard Multi-Sensor Re-Targeting, Phase I

Completed Technology Project

Project Introduction

Autonomous Collaborative Agents for Onboard Multi-Sensor Re-Targeting, Phase I
Technologies that support the configuration of sensors and satellites, and allow the reconfiguration or retargeting of sensors in response to user demand or significant events require mechanisms to autonomously understand the type and current state of on-board resources and to re-task these resources in such as way that the system achieves its global objectives. Here we propose the development of an integrated framework for onboard dynamic sensor (re)configuration, discovery and classification of data, based on SensorML (Sensor model language). We also model each satellite as a multi-criteria multi constraint optimization problem to optimize the usage of resources in response to significant events without adversely affecting the normal operations. This is achieved through negotiation among various satellites that have overlapping sensing capabilities so that globally optimal solutions can be found by computing joint plan qualities resulting due to sharing of resources. We propose to use IAI's propriety Cybele agent platform (www.cybelepro.com) that provides capability to model and simulate such complex distributed systems. DIVA a case tool developed by IAI would be employed to design and implement negotiation protocols among satellite agents to demonstrate the collaborative global optimization of autonomous planning process for multi-sensor retargeting. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

A final report document may be available for this project. If you would like to request it, please contact us.

^