Skip Navigation
SBIR/STTR

Wireless Batteryless Remote Sensors for Automated Monitoring, Control, and Inspection, Phase I

Completed Technology Project

Project Introduction

Wireless Batteryless Remote Sensors for Automated Monitoring, Control, and Inspection, Phase I
Two new catogories of wireless batteryless sensors are proposed: magnetoelastic and LC type. These sensors are also chipless which provide significantly lower cost and also higher operating temperatures than chip-based sensors. This technology is al alternative to SAW (surface acoustic wave) wireless sensors that cannot operate through many materials layers, such as in a vehicle structure or fuel tank. Magnetoelastic sensors and LC sensors operate at lower frequencies that have better penetration and also enable lower-cost readers and antenna arrays to be constructed. Among the parameters that can be sensed are: temperature, pressure/strain, humidity, and chemical enviroment. The PI is the inventor on several patents (others pending) for these sensor technologies. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

A final report document may be available for this project. If you would like to request it, please contact us.

^