Skip Navigation
SBIR/STTR

Large Format Uncooled Focal Plane Array, Phase II

Completed Technology Project

Project Introduction

Large Format Uncooled Focal Plane Array, Phase II
Black Forest Engineering has identified innovative modifications in uncooled focal plane array (UFPA) architecture and processing that allows development of large format long wavelength infrared (8-14 ?m) imaging sensors to meet future NASA system requirements for a light weight, low power, and radiation tolerant imager. These modifications allow development of bolometer-based large format UFPA, with a pixel pitch of 20-?m and 1024x768 pixel elements with sensitivity comparable to commercially available UFPAs with 30-?m pixel pitch. The identified modifications are applicable to amorphous silicon bolometer-based UFPAs, such as those manufactured by Raytheon Commercial Infrared in Dallas, Texas. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

Light bulb

Suggest an Edit

Recommend changes and additions to this project record.

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

^