Skip Navigation
SBIR/STTR

A Nanoparticulate Photocatalytic Filter for Removal of Trace Contaminant Gases, Phase I

Completed Technology Project

Project Introduction

A Nanoparticulate Photocatalytic Filter for Removal of Trace Contaminant Gases, Phase I
Maintaining a healthy atmosphere in closed life support systems is necessary for the well being of the crew and success of a space mission. Current trace contaminant control systems for removal of trace contaminant gases from cabin air are based on activated carbon filter and high temperature catalytic oxidation. However, activated carbon and high temperature oxidation air cleaners suffer from absorbent saturation and poisoning, which leads to off gassing. Also, the units become a breading ground for microorganisms, and the activated carbon generates a potentially hazardous secondary waste stream. In this Phase I project Lynntech proposes to demonstrate the feasibility of using a reagentless advanced low temperature catalytic air-revitalizing unit based on a nanoparticulate photocatalytic filter to eliminate both chemicals and microorganisms from air. The benefits of this approach are its low cost, low power consumption, longevity, diverse flow rate capacity, size and performance. In addition, it is reagentless and it does not generate a secondary waste stream. In the Phase II project, a fully operational prototype will be delivered to NASA. More »

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

Light bulb

Suggest an Edit

Recommend changes and additions to this project record.

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

^