Skip Navigation
Small Business Innovation Research/Small Business Tech Transfer

Physics and Statistics Based Selection of SLM and EBM Process Parameters to Mitigate Defects and to Control Deposit Microstructure, Phase II

Completed Technology Project

Project Introduction

The ability to assign a level of confidence for build quality is fundamental to the deployment of powder bed technology. Accordingly, the research objective of this work is to use probability theory as a glue to combine the physics-based models used for the selection of processing parameters together in order to produce quality deposits using the following approach: (1) Use probability theory as the glue to combine physics-based models for melt-pool thermal-fluid behavior and track cross-section formation in order to determine the deposition parameters; (2) Enhance the physics-based model to predict vaporization and expulsion of the additive material, melt pool buckling, transport of gas bubbles, determination of hatch distance, inter-track and inter-layer wetting; (3) Perform probabilistic assessment for the performance of the deposition parameters for their ability to mitigate defects, attain consistency of size for the fused tracks, flatness of the top layer, and the material microstructure; (4) Use the solidification parameters and thermal cycling during deposition to predict the precipitation reactions; (5) Perform deposition experiments to demonstrate the ability to engineer the deposition parameters. This work would result in reduction of effort for the development of process parameters and part qualification for specialty materials of interest to NASA. More »

Anticipated Benefits

Primary U.S. Work Locations and Key Partners

Technology Transitions

Share this Project

Organizational Responsibility

Project Management

Project Duration

Technology Maturity (TRL)

Technology Areas

Target Destination

Light bulb

Suggest an Edit

Recommend changes and additions to this project record.