Skip Navigation
SBIR/STTR

Hight Energy Fiber Laser Based Lidar Transmitter for Topographic Mapping, Phase I

Completed Technology Project

Project Introduction

Hight Energy Fiber Laser Based Lidar Transmitter for Topographic Mapping, Phase I
This SBIR will develop core Yb laser technology that is higher than 50% optical to optical efficient with pulse energies up to 300uJ/pulse in the all fiber version and up to 5mJ using planer waveguide power amplifiers. This SBIR try to newest fiber technology 3C fiber as the gain medium fiber to improve the stability of beam profile, pointing and polarization stability to suitable for space working environment. The proposed laser transmitter is based on Fibertek's proprietary laser architecture that utilize state-of-the-art optical and ultra high bandwidth RF analog and digital electronic component technologies. Technical Objectives of SBIR program: Analysis and Design of high energy, high efficient fiber based 3C amplifier transmitter at the 1030 nm. Laboratory Benchtop Demonstration of 300uJ/pulse operation at 10 kHz with 1.5 ns pulse width and >17dB PER Design fibre-PWG hybrid amplifier and have PWG fabricated and tested Work Plan for Phase I: Model & optimize both type amplifiers' parameters for high energy, high efficiency and stability Build fiber based lidar transmitter and demonstrate proposed operation in the laboratory environment. Initial investigate on the PWG optical characterizations and amplification performance. More »

Anticipated Benefits

Primary U.S. Work Locations and Key Partners

Project Library

Share this Project

Organizational Responsibility

Project Management

Project Duration

Technology Maturity (TRL)

This is a historic project that was completed before the creation of TechPort on October 1, 2012. Available data has been included. This record may contain less data than currently active projects.

^