\tThe Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration needs of NASA, other government agencies and the commercial space sector. Innovative efforts with high risk and high payoff will be encouraged. The program is composed of two competitively awarded components.
","parentProgram":{"ableToSelect":false,"isActive":true,"description":"Catalyst is a portfolio of early stage programs that specialize in different innovation constituencies and mechanisms to push the state of the art in aerospace technology development","programId":92327,"responsibleMd":{"canUserEdit":false,"locationEdit":false,"organizationRolePretty":"","organizationTypePretty":""},"title":"Catalyst","manageGaps":false,"acronymOrTitle":"Catalyst"},"parentProgramId":92327,"programId":69,"responsibleMd":{"organizationId":4875,"organizationName":"Space Technology Mission Directorate","acronym":"STMD","organizationType":"NASA_Mission_Directorate","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"","organizationTypePretty":"NASA Mission Directorate"},"responsibleMdOffice":4875,"stockImageFileId":36658,"title":"Space Technology Research Grants","manageGaps":false,"acronymOrTitle":"STRG"},"description":"Although solid oxide fuel cells (SOFCs) are a source of both efficient and clean electricity, the brittle ceramic materials which comprise them are difficult to form into complex architectures. Even in this simple geometry, the individual cell components must be fabricated separately and assembled by hand, meaning that cells, interconnect layers, and gas seals must be brought into contact by mechanically compressing them using heavy end-plates and bolts, which contribute substantially to the weight, cost, and assembly time of the SOFC stacks, and precluding their use in mobile applications such as space travel.For these reasons, a new approach is required for the manufacture of SOFCs, which will be capable of fabricating entire, monolithic fuel cell stacks in a single step without the need for subsequent assembly. The Tissue Engineering and Additive Manufacturing (TEAM) Lab led by Prof. Ramille Shah at Northwestern University has recently developed a new 3D-printing technique called 3D-Painting, which enables a single, extrusion-based platform to rapidly 3D-print hundreds of different materials from liquid, particle-laden 3D-inks. 3D-printed ceramic structures undergo thermal processing to achieve binder burn-out and particle sintering according to a low-temperature firing protocol. For this process to successfully create high-quality SOFCs, each individual material within the 3D-printed structure must undergo a similar degree of shrinkage resulting from binder-burnout and sintering to prevent cracking, warping, or delamination of the final structure, and must furthermore achieve a specific microstructure to enable the component's function. This requirement is non-trivial, considering that different microstructural characteristics must be simultaneously attained for individual materials/components during single-step firing, all while maintaining consistent shrinkage between materials. I propose to develop a quantitative, empirical model which will describe the influence of 3D-ink composition (particle volume fraction) and pore-formers (e.g. graphite) on the resulting sintered microstructures (porosity, pore tortuosity, mechanical strength) and volumetric reduction of single and multi-ceramic 3D-printed structures. Using this knowledge, I will design a series of optimized 3D-inks that can be 3D-printed and reduced-temperature fired into monolithic, multi-ceramic, functional SOFC structures consistent with the described microstructural and shrinkage criteria. After this, I propose to characterize the function of both single SOFCs and small SOFC stacks consisting of three to five SOFCs created using 3D-Painting and evaluate the electrochemical performance and microstructural evolution of individual components resulting from single and multi-cycle cell activity.
","benefits":"This approach for the manufacture of SOFCs will be capable of fabricating entire, monolithic fuel cell stacks in a single step without the need for subsequent assembly.
","releaseStatus":"Released","status":"Completed","viewCount":552,"destinationType":["Moon_and_Cislunar","Mars","Earth"],"trlBegin":2,"trlCurrent":3,"trlEnd":3,"lastUpdated":"12/18/25","favorited":false,"detailedFunding":false,"projectContacts":[{"contactId":505292,"canUserEdit":false,"firstName":"Scott","lastName":"Barnett","fullName":"Scott Barnett","fullNameInverted":"Barnett, Scott","receiveEmail":"Subscribed_User","projectContactRole":"Principal_Investigator","projectContactId":561134,"projectId":94077,"programContactRolePretty":"","projectContactRolePretty":"Principal Investigator"},{"contactId":354565,"canUserEdit":false,"firstName":"Nicholas","lastName":"Geisendorfer","fullName":"Nicholas R Geisendorfer","fullNameInverted":"Geisendorfer, Nicholas R","middleInitial":"R","email":"nicholas.r.geisendorfer@nasa.gov","receiveEmail":"Subscribed_User","projectContactRole":"Co_Investigator","projectContactId":561135,"projectId":94077,"programContactRolePretty":"","projectContactRolePretty":"Co-Investigator"}],"programContacts":[{"contactId":321177,"canUserEdit":false,"firstName":"Matthew","lastName":"Deans","fullName":"Matthew C Deans","fullNameInverted":"Deans, Matthew C","middleInitial":"C","email":"matthew.c.deans-1@nasa.gov","receiveEmail":"Subscribed_User","programContactRole":"Program_Director","programContactId":267,"programId":69,"programContactRolePretty":"Program Director","projectContactRolePretty":""},{"contactId":183514,"canUserEdit":false,"firstName":"Hung","lastName":"Nguyen","fullName":"Hung D Nguyen","fullNameInverted":"Nguyen, Hung D","middleInitial":"D","email":"hung.d.nguyen@nasa.gov","receiveEmail":"Subscribed_User","programContactRole":"Program_Manager","programContactId":162,"programId":69,"programContactRolePretty":"Program Manager","projectContactRolePretty":""}],"leadOrganization":{"organizationId":3134,"organizationName":"Northwestern University","organizationType":"Academia","city":"Evanston","stateTerritoryId":39,"stateTerritory":{"abbreviation":"IL","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Illinois","stateTerritoryId":39,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"60208","murepUnitId":147767,"academicDegreeType":"Private_4_year","projectId":94077,"projectOrganizationId":587090,"organizationRole":"Lead_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Lead Organization","organizationTypePretty":"Academia"},"otherOrganizations":[{"organizationId":3134,"organizationName":"Northwestern University","organizationType":"Academia","city":"Evanston","stateTerritoryId":39,"stateTerritory":{"abbreviation":"IL","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Illinois","stateTerritoryId":39,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"60208","murepUnitId":147767,"academicDegreeType":"Private_4_year","projectId":94077,"projectOrganizationId":587090,"organizationRole":"Lead_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Lead Organization","organizationTypePretty":"Academia"},{"organizationId":4946,"organizationName":"Jet Propulsion Laboratory","acronym":"JPL","organizationType":"FFRDC_2fUARC","city":"Pasadena","stateTerritoryId":59,"stateTerritory":{"abbreviation":"CA","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"California","stateTerritoryId":59,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"91109","projectId":94077,"projectOrganizationId":587089,"organizationRole":"Supporting_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Supporting Organization","organizationTypePretty":"FFRDC/UARC"}],"primaryTx":{"taxonomyNodeId":11367,"taxonomyRootId":8817,"parentNodeId":11365,"code":"TX12.4.2","title":"Digital Transformation Technologies for Manufacturing","description":"Digital transformation technologies include digital twins, artificial intelligence, and computational materials and process approaches.","exampleTechnologies":"Integration of smart sensors, controls, and measurement, analysis, decision support, and communication software tools for process control; model-based, digital implementation that integrates design, manufacturing and product support processes","level":3,"hasChildren":false,"selected":false,"isPrimary":true,"hasInteriorContent":true},"primaryTxTree":[[{"taxonomyNodeId":11340,"taxonomyRootId":8817,"code":"TX12","title":"Materials, Structures, Mechanical Systems, and Manufacturing","level":1,"hasChildren":true,"selected":false,"hasInteriorContent":true},{"taxonomyNodeId":11365,"taxonomyRootId":8817,"parentNodeId":11340,"code":"TX12.4","title":"Manufacturing","description":"This area covers innovative physical manufacturing processes and integrations with analysis and design through a digital thread.","level":2,"hasChildren":true,"selected":false,"hasInteriorContent":true},{"taxonomyNodeId":11367,"taxonomyRootId":8817,"parentNodeId":11365,"code":"TX12.4.2","title":"Digital Transformation Technologies for Manufacturing","description":"Digital transformation technologies include digital twins, artificial intelligence, and computational materials and process approaches.","exampleTechnologies":"Integration of smart sensors, controls, and measurement, analysis, decision support, and communication software tools for process control; model-based, digital implementation that integrates design, manufacturing and product support processes","level":3,"hasChildren":false,"selected":true,"hasInteriorContent":true}]],"technologyOutcomes":[{"technologyOutcomeId":97755,"projectId":94077,"project":{"projectId":94077,"title":"Efficient and Scalable Fabrication of Solid Oxide Fuel Cells via 3D-Printing","startDate":"2017-08-01","startYear":2017,"startMonth":8,"endDate":"2021-07-31","endYear":2021,"endMonth":7,"programId":69,"program":{"ableToSelect":false,"acronym":"STRG","isActive":true,"description":"\tThe Space Technology Research Grants Program will accelerate the development of "push" technologies to support the future space science and exploration needs of NASA, other government agencies and the commercial space sector. Innovative efforts with high risk and high payoff will be encouraged. The program is composed of two competitively awarded components.
","parentProgram":{"ableToSelect":false,"isActive":true,"description":"Catalyst is a portfolio of early stage programs that specialize in different innovation constituencies and mechanisms to push the state of the art in aerospace technology development","programId":92327,"responsibleMd":{"canUserEdit":false,"locationEdit":false,"organizationRolePretty":"","organizationTypePretty":""},"title":"Catalyst","manageGaps":false,"acronymOrTitle":"Catalyst"},"parentProgramId":92327,"programId":69,"responsibleMd":{"organizationId":4875,"organizationName":"Space Technology Mission Directorate","acronym":"STMD","organizationType":"NASA_Mission_Directorate","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"","organizationTypePretty":"NASA Mission Directorate"},"responsibleMdOffice":4875,"stockImageFileId":36658,"title":"Space Technology Research Grants","manageGaps":false,"acronymOrTitle":"STRG"},"description":"Although solid oxide fuel cells (SOFCs) are a source of both efficient and clean electricity, the brittle ceramic materials which comprise them are difficult to form into complex architectures. Even in this simple geometry, the individual cell components must be fabricated separately and assembled by hand, meaning that cells, interconnect layers, and gas seals must be brought into contact by mechanically compressing them using heavy end-plates and bolts, which contribute substantially to the weight, cost, and assembly time of the SOFC stacks, and precluding their use in mobile applications such as space travel.For these reasons, a new approach is required for the manufacture of SOFCs, which will be capable of fabricating entire, monolithic fuel cell stacks in a single step without the need for subsequent assembly. The Tissue Engineering and Additive Manufacturing (TEAM) Lab led by Prof. Ramille Shah at Northwestern University has recently developed a new 3D-printing technique called 3D-Painting, which enables a single, extrusion-based platform to rapidly 3D-print hundreds of different materials from liquid, particle-laden 3D-inks. 3D-printed ceramic structures undergo thermal processing to achieve binder burn-out and particle sintering according to a low-temperature firing protocol. For this process to successfully create high-quality SOFCs, each individual material within the 3D-printed structure must undergo a similar degree of shrinkage resulting from binder-burnout and sintering to prevent cracking, warping, or delamination of the final structure, and must furthermore achieve a specific microstructure to enable the component's function. This requirement is non-trivial, considering that different microstructural characteristics must be simultaneously attained for individual materials/components during single-step firing, all while maintaining consistent shrinkage between materials. I propose to develop a quantitative, empirical model which will describe the influence of 3D-ink composition (particle volume fraction) and pore-formers (e.g. graphite) on the resulting sintered microstructures (porosity, pore tortuosity, mechanical strength) and volumetric reduction of single and multi-ceramic 3D-printed structures. Using this knowledge, I will design a series of optimized 3D-inks that can be 3D-printed and reduced-temperature fired into monolithic, multi-ceramic, functional SOFC structures consistent with the described microstructural and shrinkage criteria. After this, I propose to characterize the function of both single SOFCs and small SOFC stacks consisting of three to five SOFCs created using 3D-Painting and evaluate the electrochemical performance and microstructural evolution of individual components resulting from single and multi-cycle cell activity.
","benefits":"This approach for the manufacture of SOFCs will be capable of fabricating entire, monolithic fuel cell stacks in a single step without the need for subsequent assembly.
","releaseStatus":"Released","status":"Completed","destinationType":["Moon_and_Cislunar","Mars","Earth"],"trlBegin":2,"trlCurrent":3,"trlEnd":3,"favorited":false,"detailedFunding":false,"programContacts":[{"contactId":183514,"canUserEdit":false,"firstName":"Hung","lastName":"Nguyen","fullName":"Hung D Nguyen","fullNameInverted":"Nguyen, Hung D","middleInitial":"D","email":"hung.d.nguyen@nasa.gov","receiveEmail":"Subscribed_User","programContactRole":"Program_Manager","programContactId":162,"programId":69,"programContactRolePretty":"Program Manager","projectContactRolePretty":""},{"contactId":321177,"canUserEdit":false,"firstName":"Matthew","lastName":"Deans","fullName":"Matthew C Deans","fullNameInverted":"Deans, Matthew C","middleInitial":"C","email":"matthew.c.deans-1@nasa.gov","receiveEmail":"Subscribed_User","programContactRole":"Program_Director","programContactId":267,"programId":69,"programContactRolePretty":"Program Director","projectContactRolePretty":""}],"endDateString":"Jul 2021","startDateString":"Aug 2017"},"technologyOutcomeDate":"2021-07-01","technologyOutcomePath":"Closed_Out","details":"Overall, the project has determined a multi-faceted approach to address performance losses associated with both mass transport and electrochemical reaction kinetics in solid oxide cells, either of which, or together in combination, could be particularly effective when operating in CO/CO2 fuel gas streams. This involves consideration of improving cell performance through both architectural as well as chemical means and in principle can be combined in a cell designed for optimized performance in traditionally challenging operating conditions.
","infoText":"Closed out","infoTextExtra":"Project closed out","isIndirect":false,"infusionPretty":"","isBiDirectional":false,"technologyOutcomeDateString":"Jul 2021","technologyOutcomeDateFullString":"July 2021","technologyOutcomePartnerPretty":"","technologyOutcomePathPretty":"Closed Out","technologyOutcomeRationalePretty":""}],"libraryItems":[{"files":[],"libraryItemId":368184,"title":"Effect of Polymer Binder on the Synthesis and Properties of 3D-Printable Particle-Based Liquid Materials and Resulting Structures","libraryItemType":"Link","url":"http://dx.doi.org/10.1021/acsomega.9b00090","projectId":94077,"isPrimary":false,"internalOnly":false,"publishedDateString":"","entryDateString":"01/28/25 02:02 AM","libraryItemTypePretty":"Link","modifiedDateString":"01/28/25 02:02 AM"},{"files":[],"libraryItemId":368183,"title":"Project Website","libraryItemType":"Link","url":"https://www.nasa.gov/strg#.VQb6T0jJzyE","projectId":94077,"internalOnly":false,"publishedDateString":"","entryDateString":"01/22/25 01:10 AM","libraryItemTypePretty":"Link","modifiedDateString":"10/25/24 02:23 PM"}],"states":[{"abbreviation":"IL","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Illinois","stateTerritoryId":39,"isTerritory":false}],"endDateString":"Jul 2021","startDateString":"Aug 2017"}}