{"project":{"acronym":"","projectId":93632,"title":"Metal Matrix Composite Enchanced Aluminum Structures","primaryTaxonomyNodes":[{"taxonomyNodeId":10880,"taxonomyRootId":8816,"parentNodeId":10879,"level":3,"code":"TX12.4.1","title":"Manufacturing Processes","definition":"This area covers innovative physical manufacturing processes for rapid production, reduced cost, increase accuracy, and defect reduction.","exampleTechnologies":"Additive manufacturing of metallics and nanofiber/fiber /ceramic matrix based composites, especially for large structures; in-space fabrication, assembly and repair; advanced casting and injection molding of metal components, including amorphous metals, metal matrix composites and high-strength aluminum alloys; advanced subtractive manufacturing processes including wire-Electrical Discharge Machining (EDM), water jetting and surface finishing; advanced laminate or sheet metal fabrication.","hasChildren":false,"hasInteriorContent":true}],"startTrl":3,"currentTrl":6,"endTrl":6,"benefits":"The proposed effort has broad applications across many NASA missions. Stiffened structures exist in launch vehicles, especially in their tank structures. Tanks have to withstand high stress during launch, and provide stability at cryogenic temperatures. Essentially, any structure that is part of a NASA mission could benefit from new, lightweight structural components. These include: future launch vehicle, crew vehicle, surface habitats, robotic explorers or cryogenic tank structures.
Non-NASA applications include aircraft such as the F-35, CH53-K, V-22, ground combat vehicles, and aluminum ship designs. Commercial aircraft such as the Boeing 777, Airbus A-380, and Airbus A340-600 could also benefit by adding MMC SR concepts. Applications in the automotive market include aluminum and magnesium castings, flywheels for hybrid vehicles, liners for lightweight composite tanks used on alternative fuel vehicles, and other types of storage tanks. Incorporation into golf club shafts, tennis rackets, and bicycle frames for the sporting goods market are also possible.","description":"The proposed research pursues a path for reducing structural weight, increasing structural performance, and reducing fabrication cost while also minimizing maintainability. The approach, which is based on selective reinforcement, is a change in the basic design philosophy and will result in the development of a hybrid material form. The selective reinforcement approach allows the structural design requirements to define the material form. This method is the reverse of the typical development flow path used for building structures. This backward path results in more efficient material forms that are of greater value to structural engineers. Specifically, the proposed effort will combine a metal matrix composite (MMC) prepreg tape with an ultrasonic additive manufacturing process. The combination of these technologies will lead to enhanced lightweight, cost-effective metallic structures with shielding and thermal management built in.","startYear":2017,"startMonth":4,"endYear":2021,"endMonth":5,"statusDescription":"Completed","principalInvestigators":[{"contactId":51896,"canUserEdit":false,"firstName":"Brian","lastName":"Gordon","fullName":"Brian L Gordon","fullNameInverted":"Gordon, Brian L","middleInitial":"L","primaryEmail":"blg@trl.com","publicEmail":true,"nacontact":false}],"programDirectors":[{"contactId":206378,"canUserEdit":false,"firstName":"Jason","lastName":"Kessler","fullName":"Jason L Kessler","fullNameInverted":"Kessler, Jason L","middleInitial":"L","primaryEmail":"jason.l.kessler@nasa.gov","publicEmail":true,"nacontact":false}],"programExecutives":[{"contactId":215154,"canUserEdit":false,"firstName":"Jennifer","lastName":"Gustetic","fullName":"Jennifer L Gustetic","fullNameInverted":"Gustetic, Jennifer L","middleInitial":"L","primaryEmail":"jennifer.l.gustetic@nasa.gov","publicEmail":true,"nacontact":false}],"programManagers":[{"contactId":62051,"canUserEdit":false,"firstName":"Carlos","lastName":"Torrez","fullName":"Carlos Torrez","fullNameInverted":"Torrez, Carlos","primaryEmail":"carlos.torrez@nasa.gov","publicEmail":true,"nacontact":false}],"projectManagers":[{"contactId":305221,"canUserEdit":false,"firstName":"Marcia","lastName":"Domack","fullName":"Marcia S Domack","fullNameInverted":"Domack, Marcia S","middleInitial":"S","primaryEmail":"marcia.s.domack@nasa.gov","publicEmail":true,"nacontact":false},{"contactId":461333,"canUserEdit":false,"firstName":"Theresa","lastName":"Stanley","fullName":"Theresa M Stanley","fullNameInverted":"Stanley, Theresa M","middleInitial":"M","primaryEmail":"theresa.m.stanley@nasa.gov","publicEmail":true,"nacontact":false}],"website":"","libraryItems":[{"file":{"fileExtension":"pdf","fileId":299073,"fileName":"SBIR_2016_2_BC_Z3.01-7393","fileSize":1734008,"objectId":295608,"objectType":{"lkuCodeId":889,"code":"LIBRARY_ITEMS","description":"Library Items","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"objectTypeId":889,"fileSizeString":"1.7 MB"},"files":[{"fileExtension":"pdf","fileId":299073,"fileName":"SBIR_2016_2_BC_Z3.01-7393","fileSize":1734008,"objectId":295608,"objectType":{"lkuCodeId":889,"code":"LIBRARY_ITEMS","description":"Library Items","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"objectTypeId":889,"fileSizeString":"1.7 MB"}],"id":295608,"title":"Briefing Chart","description":"Metal Matrix Composite Enchanced Aluminum Structures, Phase II Briefing Chart","libraryItemTypeId":1222,"projectId":93632,"primary":false,"publishedDateString":"","contentType":{"lkuCodeId":1222,"code":"DOCUMENT","description":"Document","lkuCodeTypeId":341,"lkuCodeType":{"codeType":"LIBRARY_ITEM_TYPE","description":"Library Item Type"}}},{"caption":"Metal Matrix Composite Enchanced Aluminum Structures, Phase II Briefing Chart Image","file":{"fileExtension":"jpg","fileId":292724,"fileName":"SBIR_2016_2_BC_Z3.01-7393","fileSize":1717642,"objectId":289241,"objectType":{"lkuCodeId":889,"code":"LIBRARY_ITEMS","description":"Library Items","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"objectTypeId":889,"fileSizeString":"1.6 MB"},"files":[{"fileExtension":"jpg","fileId":292724,"fileName":"SBIR_2016_2_BC_Z3.01-7393","fileSize":1717642,"objectId":289241,"objectType":{"lkuCodeId":889,"code":"LIBRARY_ITEMS","description":"Library Items","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"objectTypeId":889,"fileSizeString":"1.6 MB"}],"id":289241,"title":"Briefing Chart Image","description":"Metal Matrix Composite Enchanced Aluminum Structures, Phase II Briefing Chart Image","libraryItemTypeId":1095,"projectId":93632,"primary":false,"publishedDateString":"","contentType":{"lkuCodeId":1095,"code":"IMAGE","description":"Image","lkuCodeTypeId":341,"lkuCodeType":{"codeType":"LIBRARY_ITEM_TYPE","description":"Library Item Type"}}},{"caption":"Final Summary Chart Image","file":{"fileExtension":"jpg","fileId":292634,"fileName":"1573244878217","fileSize":839361,"objectId":289151,"objectType":{"lkuCodeId":889,"code":"LIBRARY_ITEMS","description":"Library Items","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"objectTypeId":889,"fileSizeString":"819.7 KB"},"files":[{"fileExtension":"jpg","fileId":292634,"fileName":"1573244878217","fileSize":839361,"objectId":289151,"objectType":{"lkuCodeId":889,"code":"LIBRARY_ITEMS","description":"Library Items","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"objectTypeId":889,"fileSizeString":"819.7 KB"}],"id":289151,"title":"Final Summary Chart Image","description":"Final Summary Chart Image","libraryItemTypeId":1095,"projectId":93632,"primary":true,"publishedDateString":"","contentType":{"lkuCodeId":1095,"code":"IMAGE","description":"Image","lkuCodeTypeId":341,"lkuCodeType":{"codeType":"LIBRARY_ITEM_TYPE","description":"Library Item Type"}}}],"transitions":[{"transitionId":69868,"projectId":93632,"partner":"Other","transitionDate":"2017-04-01","path":"Advanced From","relatedProjectId":89652,"relatedProject":{"acronym":"","projectId":89652,"title":"Metal Matrix Composite Enchanced Aluminum Structures","startTrl":3,"currentTrl":4,"endTrl":4,"benefits":"The proposed effort has broad applications across many NASA missions. Stiffened structures exist in launch vehicles, especially in their tank structures. Tanks have to withstand high stress during launch, and provide stability at cryogenic temperatures. Essentially, any structure that is part of a NASA mission could benefit from new, lightweight structural components. These include: future launch vehicle, crew vehicle, surface habitats, robotic explorers or cryogenic tank structures.
Non-NASA applications include aircraft such as the F-35, CH53-K, V-22, ground combat vehicles, and aluminum ship designs. Commercial aircraft such as the Boeing 777, Airbus A-380, and Airbus A340-600 could also benefit by adding MMC SR concepts. Applications in the automotive market include aluminum and magnesium castings, flywheels for hybrid vehicles, liners for lightweight composite tanks used on alternative fuel vehicles, and other types of storage tanks. Incorporation into golf club shafts, tennis rackets, and bicycle frames for the sporting goods market are also possible.","description":"The proposed research pursues a path for reducing structural weight, increasing structural performance, and reducing fabrication cost while also minimizing maintainability. The approach, which is based on selective reinforcement, is a change in the basic design philosophy and will result in the development of a hybrid material form. The selective reinforcement approach allows the structural design requirements to define the material form. This method is the reverse of the typical development flow path used for building structures. This backward path results in more efficient material forms that are of greater value to structural engineers. Specifically, the proposed effort will combine a metal matrix composite (MMC) prepreg tape with an ultrasonic additive manufacturing process. The combination of these technologies will lead to enhanced lightweight, cost-effective metallic structures with shielding and thermal management built in.","startYear":2016,"startMonth":6,"endYear":2016,"endMonth":12,"statusDescription":"Completed","website":"","program":{"acronym":"SBIR/STTR","active":true,"description":"
The NASA SBIR and STTR programs fund the research, development, and demonstration of innovative technologies that fulfill NASA needs as described in the annual Solicitations and have significant potential for successful commercialization. If you are a small business concern (SBC) with 500 or fewer employees or a non-profit RI such as a university or a research laboratory with ties to an SBC, then NASA encourages you to learn more about the SBIR and STTR programs as a potential source of seed funding for the development of your innovations.
The SBIR and STTR programs have 3 phases:
The SBIR and STTR Phase I contracts last for 6 months with a maximum funding of $125,000, and Phase II contracts last for 24 months with a maximum funding of $750,000 - $1.5 million.
Opportunity for Continued Technology Development Post-Phase II:
The NASA SBIR/STTR Program currently has in place two initiatives for supporting its small business partners past the basic Phase I and Phase II elements of the program that emphasize opportunities for commercialization. Specifically, the NASA SBIR/STTR Program has the Phase II Enhancement (Phase II-E) and Phase II eXpanded (Phase II-X) contract options.
Please review the links below to obtain more information on the SBIR/STTR programs.
Provides an overview of the SBIR and STTR programs as implemented by NASA
Provides access to the annual SBIR/STTR Solicitations containing detailed information on the program eligibility requirements, proposal instructions and research topics and subtopics
Schedule and links for the SBIR/STTR solicitations and selection announcements
Federal and non-Federal sources of assistance for small business
Search our complete archive of awarded project abstracts to learn about what NASA has funded
Still have questions? Visit the program FAQs
","programId":73,"responsibleMd":{"acronym":"STMD","canUserEdit":false,"city":"","external":false,"linkCount":0,"organizationId":4875,"organizationName":"Space Technology Mission Directorate","organizationType":"NASA_Mission_Directorate","naorganization":false,"organizationTypePretty":"NASA Mission Directorate"},"responsibleMdId":4875,"stockImageFileId":36648,"title":"Small Business Innovation Research/Small Business Tech Transfer"},"lastUpdated":"2024-1-10","releaseStatusString":"Released","viewCount":88,"endDateString":"Dec 2016","startDateString":"Jun 2016"},"infoText":"Advanced from another project within the program","infoTextExtra":"Another project within the program (Metal Matrix Composite Enchanced Aluminum Structures)","dateText":"April 2017"},{"transitionId":69867,"projectId":93632,"transitionDate":"2021-05-01","path":"Closed Out","closeoutDocuments":[{"title":"Final Summary Chart","file":{"fileExtension":"pdf","fileId":308158,"fileName":"1573246851555","fileSize":950114,"objectId":69867,"objectType":{"lkuCodeId":1841,"code":"TRANSITION_FILES","description":"Transition Files","lkuCodeTypeId":182,"lkuCodeType":{"codeType":"OBJECT_TYPE","description":"Object Type"}},"fileSizeString":"927.8 KB"},"transitionId":69867,"fileId":308158}],"infoText":"Closed out","infoTextExtra":"","dateText":"May 2021"}],"primaryImage":{"file":{"fileExtension":"jpg","fileId":292634,"fileSizeString":"0 Byte"},"id":289151,"description":"Final Summary Chart Image","projectId":93632,"publishedDateString":""},"responsibleMd":{"acronym":"STMD","canUserEdit":false,"city":"","external":false,"linkCount":0,"organizationId":4875,"organizationName":"Space Technology Mission Directorate","organizationType":"NASA_Mission_Directorate","naorganization":false,"organizationTypePretty":"NASA Mission Directorate"},"program":{"acronym":"SBIR/STTR","active":true,"description":"The NASA SBIR and STTR programs fund the research, development, and demonstration of innovative technologies that fulfill NASA needs as described in the annual Solicitations and have significant potential for successful commercialization. If you are a small business concern (SBC) with 500 or fewer employees or a non-profit RI such as a university or a research laboratory with ties to an SBC, then NASA encourages you to learn more about the SBIR and STTR programs as a potential source of seed funding for the development of your innovations.
The SBIR and STTR programs have 3 phases:
The SBIR and STTR Phase I contracts last for 6 months with a maximum funding of $125,000, and Phase II contracts last for 24 months with a maximum funding of $750,000 - $1.5 million.
Opportunity for Continued Technology Development Post-Phase II:
The NASA SBIR/STTR Program currently has in place two initiatives for supporting its small business partners past the basic Phase I and Phase II elements of the program that emphasize opportunities for commercialization. Specifically, the NASA SBIR/STTR Program has the Phase II Enhancement (Phase II-E) and Phase II eXpanded (Phase II-X) contract options.
Please review the links below to obtain more information on the SBIR/STTR programs.
Provides an overview of the SBIR and STTR programs as implemented by NASA
Provides access to the annual SBIR/STTR Solicitations containing detailed information on the program eligibility requirements, proposal instructions and research topics and subtopics
Schedule and links for the SBIR/STTR solicitations and selection announcements
Federal and non-Federal sources of assistance for small business
Search our complete archive of awarded project abstracts to learn about what NASA has funded
Still have questions? Visit the program FAQs
","programId":73,"responsibleMd":{"acronym":"STMD","canUserEdit":false,"city":"","external":false,"linkCount":0,"organizationId":4875,"organizationName":"Space Technology Mission Directorate","organizationType":"NASA_Mission_Directorate","naorganization":false,"organizationTypePretty":"NASA Mission Directorate"},"responsibleMdId":4875,"stockImageFileId":36648,"title":"Small Business Innovation Research/Small Business Tech Transfer"},"leadOrganization":{"canUserEdit":false,"city":"Triadelphia","congressionalDistrict":"West Virginia 01","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"external":true,"linkCount":0,"organizationId":2672,"organizationName":"Touchstone Research Laboratory, Ltd.","organizationType":"Industry","stateTerritory":{"abbreviation":"WV","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"West Virginia","stateTerritoryId":1},"stateTerritoryId":1,"ein":"541290222 ","dunsNumber":"101582922","uei":"FBK3WT3XQVH8","naorganization":false,"organizationTypePretty":"Industry"},"supportingOrganizations":[{"acronym":"LaRC","canUserEdit":false,"city":"Hampton","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"external":false,"linkCount":0,"organizationId":4852,"organizationName":"Langley Research Center","organizationType":"NASA_Center","stateTerritory":{"abbreviation":"VA","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Virginia","stateTerritoryId":7},"stateTerritoryId":7,"naorganization":false,"organizationTypePretty":"NASA Center"}],"statesWithWork":[{"abbreviation":"VA","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Virginia","stateTerritoryId":7},{"abbreviation":"WV","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"West Virginia","stateTerritoryId":1}],"lastUpdated":"2024-1-10","releaseStatusString":"Released","viewCount":169,"endDateString":"May 2021","startDateString":"Apr 2017"}}