{"project": { "benefits": "

This technology should reduce the number of people needed to load cryogenic propellants into launch vehicles as well as increase safety.<\/p>

If used for launch vehicles, this technology should reduce the number of people needed to load cryogenic propellants into launch vehicles as well as increase safety.<\/p>", "programDirectors": {"programDirector": "Jason Crusan"}, "responsibleProgram": "Advanced Exploration Systems Division", "workLocations": {"workLocation": [ "Alabama", "California", "Florida", "Mississippi", "Ohio", "Texas" ]}, "website": "", "supportedMissionType": "Projected Mission (Pull)", "endDate": "Sep 2016", "primaryTas": {"technologyAreas": [ { "code": 12, "name": "Materials, Structures, Mechanical Systems and Manufacturing", "id": 3250 }, { "code": 12.2, "name": "Structures", "id": 3415 }, { "code": "12.2.3", "name": "Reliability and Sustainment", "id": 3968 } ]}, "destinations": {"destination": [ "Mars", "Others Inside the Solar System" ]}, "projectManagers": {"projectManager": "John Gurecki"}, "description": "

The AES Autonomous Propellant Loading (APL) project consists of three activities. The first is to develop software that will automatically control loading of cryogenic propellant into launch vehicles to ensure safe and successful propellant loading. <\/p>

The second part of the project is to build a system to demonstrate zero-loss cryogenic propellant (liquid hydrogen) transfer and storage, hydrogen liquifaction, and liquid hydrogen densification. <\/p>

The third area is developing systems to develop technologies to monitor the status of composite tanks used to store cryogenic propellants to ensure they are safe to use.<\/p>

 <\/p>

This project builds on the AES Integrated Ground Operations Demonstration Unit (IGODU) project.<\/p>

The APL project consists of three activities: autonomous control software; demonstrating cryogenic zero-loss transfer and storage, liquifaction, and densification; and developing techniques to monitor composite cryogen storage tanks. As well as being used on Earth, these technologies can be used as part of in situ resource utilization (ISRU), for example to liquify, densify, store, and transfer cryogenic propellants produced on Mars to return astronauts to Earth.<\/p>

Autonomous Control Software:<\/strong><\/p>

The autonomous control software contains a physics-based model of the expected system operation. If the inputs from sensors do not agree with the expected system state, the software will determine and initiate the appropriate steps needed to either keep the system operating safely or shut it down safely. This allows the software to perform reasoning based on sensor inputs to determine the causes of anomalies and take appropriate actions. These actions may include reconfiguring the system or safely shutting it down.<\/p>

Initially, the software will be tested using the Universal Propellant Servicing System (UPSS), a small launch vehicle facility being built at Kennedy Space Center (KSC). Once demonstrated on UPSS, the technology is anticipated to be infused into the Space Launch System (SLS) vehicle.<\/p>

Ground Operations Demonstration Unit for Liquid Hydrogen (GODU LH2)<\/strong><\/p>

During the Space Shuttle program, engineers at KSC discovered that over 50% of the LH2 purchased by NASA was lost from the time it was loaded onto a tanker, offloaded into a storage container at KSC, transferred from the storage container to the Space Shuttle External Tank and the Space Shuttle launched. This part of APL is to eliminate the losses and enhance liquid hydrogen production and storage by:<\/p>