Bridging the gap. That's the mission of NASA's Technology Demonstration Missions, or TDM: to bridge the gap between need and means, between scientific and engineering challenges and the technological innovations needed to overcome them, between early proof-of-concept tests and the final infusion of cost-effective, revolutionary new technologies into robust NASA, government and commercial space missions. The TDM program, part of NASA's Space Technology Mission Directorate in Washington, focuses on crosscutting technologies with strong customer interest that meet the needs of NASA and industry by enabling new missions or greatly enhancing existing ones. Chosen technologies will be thoroughly ground- and flight-tested in relevant operating environments -- reducing risks to future flight missions, gaining operational heritage and continuing NASA’s long history as a technological leader. These newly proven technologies will enable future NASA missions to pursue bolder goals; make human missions safer and more rewarding; and enable new expansion of space industry in the government and commercial sectors.
NASA's Technology Demonstration Missions bridge the gap between scientific and engineering challenges and the technological innovations needed to overcome them, enabling robust new space missions. The TDM Program Office at NASA's Marshall Center is overseeing a portfolio of high-reward projects led by NASA centers and industry partners across the country.
","programId":70,"responsibleMd":{"organizationId":4875,"organizationName":"Space Technology Mission Directorate","acronym":"STMD","organizationType":"NASA_Mission_Directorate","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"","organizationTypePretty":"NASA Mission Directorate"},"responsibleMdOffice":4875,"stockImageFileId":36654,"title":"Technology Demonstration Missions","manageGaps":false,"acronymOrTitle":"TDM"},"acronym":"CEUS","description":"NASA's Space Launch System (SLS) will provide the capability to travel to deep space. The current state-of-the-art material for structures of this scale is an aluminum alloy that poses significant challenges to further reduce weight while maintaining requisite safety margins. Existing human space flight vehicles do not utilize composites for primary structures since critical technologies have not been validated at scale in a relevant environment. The purpose of this project is to design, build, and test composite structures on the same scale needed to validate manufacturability, structural margins, and thermal isolation improvements. The objective is to provide designers a validated alternative structural material candidate in future trade studies for SLS as well as other large booster and space science platform structures. The project is a cooperative effort between the STMD and HEOMD, involving multiple NASA Centers. The project will also leverage collaborations with DoD, industry and academia to provide the most innovative and affordable ideas.
","benefits":"The objective is to provide designers a validated alternative structural material candidate in future trade studies for SLS as well as other large booster and space science platform structures. Composite structures provide potential cost savings, weight savings and thermal advantages with increased reliability compared to metallic structures.
","releaseStatus":"Released","status":"Completed","viewCount":2599,"destinationType":["Moon_and_Cislunar","Mars","Others_Inside_the_Solar_System"],"trlBegin":5,"trlCurrent":6,"trlEnd":6,"lastUpdated":"02/13/26","favorited":false,"detailedFunding":false,"projectContacts":[{"contactId":26,"canUserEdit":false,"firstName":"John","lastName":"Vickers","fullName":"John H Vickers","fullNameInverted":"Vickers, John H","middleInitial":"H","email":"john.h.vickers@nasa.gov","receiveEmail":"Subscribed_User","projectContactRole":"Principal_Investigator","projectContactId":541772,"projectId":15913,"programContactRolePretty":"","projectContactRolePretty":"Principal Investigator"}],"programContacts":[],"leadOrganization":{"organizationId":4854,"organizationName":"Marshall Space Flight Center","acronym":"MSFC","organizationType":"NASA_Center","city":"Huntsville","stateTerritoryId":18,"stateTerritory":{"abbreviation":"AL","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Alabama","stateTerritoryId":18,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"35805","projectId":15913,"projectOrganizationId":569729,"organizationRole":"Lead_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Lead Organization","organizationTypePretty":"NASA Center"},"otherOrganizations":[{"organizationId":4854,"organizationName":"Marshall Space Flight Center","acronym":"MSFC","organizationType":"NASA_Center","city":"Huntsville","stateTerritoryId":18,"stateTerritory":{"abbreviation":"AL","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Alabama","stateTerritoryId":18,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"35805","projectId":15913,"projectOrganizationId":569729,"organizationRole":"Lead_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Lead Organization","organizationTypePretty":"NASA Center"},{"organizationId":4860,"organizationName":"Glenn Research Center","acronym":"GRC","organizationType":"NASA_Center","city":"Cleveland","stateTerritoryId":23,"stateTerritory":{"abbreviation":"OH","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Ohio","stateTerritoryId":23,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"44135","projectId":15913,"projectOrganizationId":569728,"organizationRole":"Supporting_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Supporting Organization","organizationTypePretty":"NASA Center"},{"organizationId":4852,"organizationName":"Langley Research Center","acronym":"LaRC","organizationType":"NASA_Center","city":"Hampton","stateTerritoryId":7,"stateTerritory":{"abbreviation":"VA","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Virginia","stateTerritoryId":7,"isTerritory":false},"country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"zipCode":"23681","projectId":15913,"projectOrganizationId":569726,"organizationRole":"Supporting_Organization","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Supporting Organization","organizationTypePretty":"NASA Center"},{"organizationId":9525,"organizationName":"Exploration Systems Development Mission Directorate","acronym":"ESDMD","organizationType":"NASA_Mission_Directorate","projectId":15913,"projectOrganizationId":569727,"organizationRole":"Cofunding_Partner","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"Cofunding Partner","organizationTypePretty":"NASA Mission Directorate"}],"primaryTx":{"taxonomyNodeId":11366,"taxonomyRootId":8817,"parentNodeId":11365,"code":"TX12.4.1","title":"Manufacturing Processes","description":"This area covers innovative physical manufacturing processes, including microgravity materials processing, welding, composites, biomanufacturing, and nanomanufacturing for high performance, reduced costs, increase accuracy, and reduced defects.","exampleTechnologies":"Additive manufacturing of metallics and nanofiber/fiber /ceramic matrix based composites, especially for large structures; in-space fabrication, assembly and repair; advanced casting and injection molding of metal components, including amorphous metals, metal matrix composites and high-strength aluminum alloys; advanced subtractive manufacturing processes including wire-Electrical Discharge Machining (EDM), water jetting and surface finishing; advanced laminate or sheet metal fabrication.","level":3,"hasChildren":false,"selected":false,"isPrimary":true,"hasInteriorContent":true},"primaryTxTree":[[{"taxonomyNodeId":11340,"taxonomyRootId":8817,"code":"TX12","title":"Materials, Structures, Mechanical Systems, and Manufacturing","level":1,"hasChildren":true,"selected":false,"hasInteriorContent":true},{"taxonomyNodeId":11365,"taxonomyRootId":8817,"parentNodeId":11340,"code":"TX12.4","title":"Manufacturing","description":"This area covers innovative physical manufacturing processes and integrations with analysis and design through a digital thread.","level":2,"hasChildren":true,"selected":false,"hasInteriorContent":true},{"taxonomyNodeId":11366,"taxonomyRootId":8817,"parentNodeId":11365,"code":"TX12.4.1","title":"Manufacturing Processes","description":"This area covers innovative physical manufacturing processes, including microgravity materials processing, welding, composites, biomanufacturing, and nanomanufacturing for high performance, reduced costs, increase accuracy, and reduced defects.","exampleTechnologies":"Additive manufacturing of metallics and nanofiber/fiber /ceramic matrix based composites, especially for large structures; in-space fabrication, assembly and repair; advanced casting and injection molding of metal components, including amorphous metals, metal matrix composites and high-strength aluminum alloys; advanced subtractive manufacturing processes including wire-Electrical Discharge Machining (EDM), water jetting and surface finishing; advanced laminate or sheet metal fabrication.","level":3,"hasChildren":false,"selected":true,"hasInteriorContent":true}]],"technologyOutcomes":[{"technologyOutcomeId":93060,"projectId":15913,"project":{"projectId":15913,"title":"Composites for Exploration Upper Stage","startDate":"2014-09-01","startYear":2014,"startMonth":9,"endDate":"2016-09-30","endYear":2016,"endMonth":9,"programId":70,"program":{"ableToSelect":false,"acronym":"TDM","isActive":true,"description":"Bridging the gap. That's the mission of NASA's Technology Demonstration Missions, or TDM: to bridge the gap between need and means, between scientific and engineering challenges and the technological innovations needed to overcome them, between early proof-of-concept tests and the final infusion of cost-effective, revolutionary new technologies into robust NASA, government and commercial space missions. The TDM program, part of NASA's Space Technology Mission Directorate in Washington, focuses on crosscutting technologies with strong customer interest that meet the needs of NASA and industry by enabling new missions or greatly enhancing existing ones. Chosen technologies will be thoroughly ground- and flight-tested in relevant operating environments -- reducing risks to future flight missions, gaining operational heritage and continuing NASA’s long history as a technological leader. These newly proven technologies will enable future NASA missions to pursue bolder goals; make human missions safer and more rewarding; and enable new expansion of space industry in the government and commercial sectors.
NASA's Technology Demonstration Missions bridge the gap between scientific and engineering challenges and the technological innovations needed to overcome them, enabling robust new space missions. The TDM Program Office at NASA's Marshall Center is overseeing a portfolio of high-reward projects led by NASA centers and industry partners across the country.
","programId":70,"responsibleMd":{"organizationId":4875,"organizationName":"Space Technology Mission Directorate","acronym":"STMD","organizationType":"NASA_Mission_Directorate","canUserEdit":false,"locationEdit":false,"organizationRolePretty":"","organizationTypePretty":"NASA Mission Directorate"},"responsibleMdOffice":4875,"stockImageFileId":36654,"title":"Technology Demonstration Missions","manageGaps":false,"acronymOrTitle":"TDM"},"acronym":"CEUS","description":"NASA's Space Launch System (SLS) will provide the capability to travel to deep space. The current state-of-the-art material for structures of this scale is an aluminum alloy that poses significant challenges to further reduce weight while maintaining requisite safety margins. Existing human space flight vehicles do not utilize composites for primary structures since critical technologies have not been validated at scale in a relevant environment. The purpose of this project is to design, build, and test composite structures on the same scale needed to validate manufacturability, structural margins, and thermal isolation improvements. The objective is to provide designers a validated alternative structural material candidate in future trade studies for SLS as well as other large booster and space science platform structures. The project is a cooperative effort between the STMD and HEOMD, involving multiple NASA Centers. The project will also leverage collaborations with DoD, industry and academia to provide the most innovative and affordable ideas.
","benefits":"The objective is to provide designers a validated alternative structural material candidate in future trade studies for SLS as well as other large booster and space science platform structures. Composite structures provide potential cost savings, weight savings and thermal advantages with increased reliability compared to metallic structures.
","releaseStatus":"Released","status":"Completed","destinationType":["Moon_and_Cislunar","Mars","Others_Inside_the_Solar_System"],"trlBegin":5,"trlCurrent":6,"trlEnd":6,"favorited":false,"detailedFunding":false,"programContacts":[],"endDateString":"Sep 2016","startDateString":"Sep 2014"},"technologyOutcomeDate":"2016-09-30","technologyOutcomePath":"Closed_Out","details":"Accomplished (1) manufacturing tool procurement, materials procurements, composite materials equivalency testing and (2) completed trade study to refocus project effort to the SLS Universal Stage Adapter (USA) Due to impacts resulting from the FY16 NASA Appropriations Bill, STMD directed the TDM Program to discontinue the CEUS project. Aspects transitioned to GCD CTE project.","infoText":"Closed out","infoTextExtra":"Project closed out","isIndirect":false,"infusionPretty":"","isBiDirectional":false,"technologyOutcomeDateFullString":"September 2016","technologyOutcomeDateString":"Sep 2016","technologyOutcomePartnerPretty":"","technologyOutcomePathPretty":"Closed Out","technologyOutcomeRationalePretty":""}],"libraryItems":[{"files":[],"libraryItemId":356206,"title":"Project Website","libraryItemType":"Link","url":"https://www.nasa.gov/directorates/spacetech/home/index.html","projectId":15913,"internalOnly":false,"publishedDateString":"","entryDateString":"01/22/25 01:10 AM","libraryItemTypePretty":"Link","modifiedDateString":"10/25/24 02:23 PM"}],"states":[{"abbreviation":"AL","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Alabama","stateTerritoryId":18,"isTerritory":false},{"abbreviation":"OH","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Ohio","stateTerritoryId":23,"isTerritory":false},{"abbreviation":"VA","country":{"abbreviation":"US","countryId":236,"name":"United States"},"countryId":236,"name":"Virginia","stateTerritoryId":7,"isTerritory":false}],"endDateString":"Sep 2016","startDateString":"Sep 2014"}}